Toyota Genuine Chemicals are designed:
- To protect your vehicle parts from damage.
- To safeguard and enhance your vehicle life with exceptional performance.
- To help you keep your Toyota looking and running just like it’s new.
- To meet/exceed the Toyota Warranty Requirement.
- For ultimate confidence that you’re giving your vehicle the best care possible.


Injector Cleaner
Explore

Injector Cleaner
It is an exclusive cleaner developed by Toyota Engineers to clean the insides of the engine by injecting it into fuel tank of your Toyota gasoline Vehicle.
Toyota genuine injector cleaner meets Toyota’s own strict quality standards and Exhibits performance characteristics particularly suited for all Toyota petroleum engine.
General Characteristics
- Powerful deposit removal capabilities.
- Cleans inside of the engines.
- Removes deposits from the injection nozzle, prevent poor combustion and recover sufficient power.
- Removes deposits from the in take valve and can achieve better accelerator response.
- It removes carbon from the spark plug, prevent misfiring and provide better engine starting.
- Removes deposits from the combustion chamber, and prevents engine knocking.
Give your car better mileage

Suspension Fluid
Explore

Suspension Fluid
Toyota genuine suspension fluid is formulated for fade-free dampening and smooth rebounds in vehicles. It remains shear stable, effectively controls friction, scuffing and wear, increases seal life. It Prevents fade more effectively than conventional fluids.
General characteristics
- Controls Dampening and Rebound
- high viscosity indices that effectively maintain their viscosities, while their antifoam agents reduce aeration and foam
- The constant friction within a shock body decreases suspension performance. Toyota Genuine Suspension Fluid contains friction modifiers to reduce the energy loss caused by friction, while anti wear agents are added to protect shocks and forks from premature wear.
- Effectively Prevents Fade
Keeps Seals Soft and Pliable

Toyota Genuine Long Life Coolant
Explore

Toyota Genuine Long Life Coolant
Genuine Toyota Super Long-Life Antifreeze/Coolant is the same high quality, factory-fill product found in new Toyota Vehicles. You’ll know it by its distinctive pink color.
It provides maximum protection and durability without the use of harmful silicates. And because it’s compatible with non-metallic materials, it helps to extend the life of water-pump seals.
Don’t trust your engine to anything less than the best: Genuine Toyota Super Long-Life Antifreeze/Coolant.
Product Range
Toyota Genuine Long Life Coolant
(Pre Mixed, Anti Rust & Anti Freeze & 100% concentrated)
Toyota Genuine Super Long Life Coolant
(50/50 Pre-Mixed, Anti Rust & Anti Freeze)
General Characteristics
- Provide excellent cooling system
- Provide freezing protection down to -37ºC & boiling protection to 108 ºC
- Prevent engine to freeze in low temperature
- Entirely safe to use in aluminum components
- Rust prevention
- Decrease corrosion.
- More than 40000 KM mileage or 24 months
* 50/50 pre mixed Coolant do not need to mix with water.
* 100 % concentrated Coolant is pure & need to be mixed with water.

Toyota Genuine Brake Fluid
Explore

Toyota Genuine Brake Fluid
Brake fluid is used inside the brake cylinder of a vehicle and is critical for the smooth functioning of the brake.
Toyota Genuine Brake fluid is an extra high performance brake fluid for use in Automotive Disc, anti-skid brake & clutch system.
Product Grade: DOT 3
General Characteristics
- High boiling point.
- Contains antioxidant, corrosion inhibitor, PH modifier, Anti rust & anti wear additives to provide higher performance
- Minimize the water absorption & variation in boiling point.
- Minimize rubber swelling that cause the leakage of brake fluid.
- Highly recommended by Toyota for Toyota vehicles
- More than 40,000 KM mileage.
Dot 3 Boiling point ºC | |
Dry | 205 ºC or higher |
Wet | 140 ºC or higher |

Toyota Genuine Gear Oil
Explore

Toyota Genuine Gear Oil
Toyota Genuine Gear Oil are high performance Gear oil having outstanding extreme pressure characteristics and load – carrying properties, intended for use in all type of Toyota Vehicles
Product Range
Manual Transmission Gear Oil
Manual transmission contain a synchro mechanism, an oil with as high a coefficient of dynamic friction as possible is required for this area, & low coefficient of static friction to provide good shift feel.
Available grades
API GL-4 75W-90
API GL-5 75W-90
Differential Gear Oil
Extreme pressure agents are added to meet the need of high pressure resistance to counter the impact loads that are applied at high sliding speeds. Suitable for automotive hypoid differentials & final drives fitted to most Cars, 4WD’s & commercial vehicles.
Available grades
API GL-5 85-90
Limited Slip Differential Oil (LSD)
Limited slip differential (LSD) has a complex structure, which in particular requires special gear oil. Therefore, the hypoid gear oil to be used depends on differential construction. Use where a limited slip is specified.
Available grades
API GL-5 85W-90
General Characteristics
- Premium quality extreme pressure gear oil designed by TMC, which gives high load carrying ability.
- Protection against wear, corrosion of steel and copper containing alloys.
- Reduced gear tooth wear due to excellent load – carrying properties.
- More than 20,000 KM mileage

Automatic Transmission Fluid
Explore

Automatic Transmission Fluid
ATF is a medium for transmitting the torque converter power. Automatic transmission vehicles require no tedious clutch / Pedal shift coordination in order to change Gears.
It is the most complex of all lubricating fluids. Not only does it have to reduce friction to prevent wear like all lubricants, but it also has to allow a certain level of friction so the transmissions internal clutch materials can engage.
ATF must be compatible with all transmission components, operate at both low and high temperature extremes, and maintain constant performance for extended periods.
Lubricates the gears, bearings and clutch in the planetary gear unit. It provides you the excellent driving experience even in broad range of driving experience.
Toyota has a wide range of ATF specially formulated for your Toyota vehicle.
Toyota specification ATF
Toyota Type T-IV — Specially formulated by Toyota for Toyota, Daihatsu and Lexus transmissions.
Toyota Type WS – New Formulation exclusive from Toyota Engineers for Modern Automatic Transmission in Toyota vehicles.
Toyota D II — This is a specification for General Motors vehicles, Toyota manufactures specify a DEXRON approved ATF. Toyota Genuine D II fulfills the requirement of Dexron 2 service standards.
CVT Fluid TC — Toyota Motor exclusively developed CVT fluid for all Toyota CVT transmission cars (belt type continuously variable transmission)
Always use Toyota Genuine ATF which is appropriate for your Toyota Transmission.
General Characteristics
- More than 20,000 KM mileage
- Good Thermal & Oxidation Stability
- Excellent low temperature capability
- Appropriate transmission design for Toyota vehicle

FAQs
Explore
History
Q1 What is ‘IMC’?
IMC stands for Indus Motor Company Ltd. It is a joint venture of the Toyota Motor Corporation, Toyota Tsusho Corporation, Japan and the House of Habib, Pakistan.
Q2 When was Indus Motor Company established?
The Company was incorporated on Dec 17, 1989, Ground Breaking Ceremony was held on and the manufacturing plant was inaugurated on April 22, 1993.
Q3 When was the stock made public?
Ans: May 25th 1992
Accounting and finance
Q1 When does the fiscal year end and when is the meeting of shareholders held?
The closing date of financial and operating activities is June 30. The Annual General Meeting of Shareholders is generally held in September every year.
Q2 How can I obtain information about the most recent financial statements?
Please refer to (Annual report section) this page for our recent business results.
Q3 How can I obtain information about the sales and profit in the past five years?
A pdf file of Company’s Annual Reports can be viewed online or downloaded. Please refer to Financial Report section.
Shares
Q1 What is ‘IMC’ symbol in various stock exchange of?
INDU
Q2 What is the trading unit of the shares?
As per law, the trading unit is one.
Q4 Who should I contact about share related procedures?
Please contact your Brokerage House for share trading purpose
Please contact Share Registrar if you have questions or requests about share related procedures such as change of address or name, registration of dividends receiving method, repurchase request of odd-lot shares, request of forms for the procedures, and so on.
Q7 Is there any special benefit plan for the shareholders?
No, there is no special benefit plan for the shareholders by Indus Motor Company
Q8 What is the date for the announcement of dividend to shareholders?
Generally the year-end dividend is announced in month of Aug/Sep and interim dividend in the month of Feb.
Q9 Free float shares details of the Company.
12,098,888= shares as on December 31, 2015.
This post is also available in: Urdu